Modulo Consulting

Sangoma S518 card

Designed and built to server standards of performance and reliability. Line protocols like PPP over ATMPPP over Ethernet, Ethernet over ATM and IP over ATM. PCI 2.2 bus interface, 64 bit (3.3v) and 32 bit (5v) compliant.

Analog FXO module X100M

X100M Module for use with the TDM400P.

Analog Quad FXO module X400P

X400P Module for use with the TDM2400P.

Analog FXS module S110M

S110M Module for use with the TDM400P.

Analog Quad FXS module S400P

S400P Module for use with the TDM2400P.

Echo cancellation module VPMADT032

The VPMADT032 is a 128ms per-channel echo cancellation module for use with Digium telephony interface cards.

Digium TDM2433E

The TDM2433E is a full-length PCI 2.2-compliant with 3 Quad FXS (12 ports) modules and 3 Quad FXO (12 ports) modules for connecting analog telephones and analog POTS lines through a PC.

Digium AEX2433E

The Digium AEX2400 is a full-length PCI-Express 1.0-compliant modular gateway card for connecting analog telephone stations and analog POTS lines through a PC. It supports a combination of up to six quad port station or trunk modules for a total of 24 lines.

Digium TDM844B

The TDM844P contains 1 Quad FXO (4 ports) module and 1 Quad FXS (4 ports) module for connecting analog POTS lines through a PC.

Digium AEX844E

The AEX844E contains 1 Quad FXO (4 ports) module, 1 Quad FXS (4 ports) module and 1 echo cancelling VPMDTA032 module for connecting analog POTS lines through a PC.

Digium TDM404E

The Digium TDM404E is a half-length PCI 2.2-compliant modular gateway card for connecting analog telephone stations and analog POTS lines through a PC. It supports a combination of up to four station or trunk modules for a total of 4 lines.

Digium AEX422E

The Digium AEX422E is a half-length PCI-Express x1 modular gateway card for connecting analog telephone stations and analog POTS lines through a PC. It supports a combination of up to four station or trunk modules for a total of 4 lines. The optional hardware echo cancellation module provides 1024 taps (128 milliseconds) of echo cancellation for superior voice quality on both trunk and station interfaces.

Sangoma A200/REMORA card

The A200/REMORA supports 2 to 24 ports, mixing FXO and FXS interfaces, as required. Each FXO module supports two FXO ports (4 ports) respectively. The card has four RJ11 ports per Remora™ card and it is fully PCI 2.2 compliant, compatible with all commercially available motherboards, proper sharing of PCI interrupts.

Sangoma A400/REMORA card

The A400/REMORA support from 2 to 24 ports, mixing FXO and FXS interfaces as required. Each FXO module supports two FXO ports (12 ports) respectively. The card connects to punch block using a standard 12-line colour coded telephone cable (Included.). The card has autosense compatibility with 5 V and 3.3 V PCI buses and it is fully PCI 2.2 compliant, compatible with all commercially available motherboards proper interrupts sharing.

Sangoma B600 card

The Sangoma B600 voice cards deliver customers a substantial cost savings, coupled with the "because it must work" quality and the Wanpipe® high-end system diagnostics, drivers, and utilities for which Sangoma is known worldwide. The card supports 4 ports of FXO and 1 Port of FXS and includes both standard and short half-height compatible mounting clips for installation in 2U rack-mount servers.

Transcoder Digium TC400B

The TC400B decompresses G.729a (8.0kbit) or G.723.1 (5.3kbit) into u-law or a-law; or, compresses u-law or a-law into G.729a (8.0kbit) or G.723.1 (5.3kbit). The TC400B is rated to handle up to 96 bi-directional G.729a transformations or 92 bi-directional G.723.1 transformations. The TC400B does not require additional licensing fees for the use of these codecs nor does it require the registration process associated with Digium's software-based G.729a codec licensing.

Digium TE121B

The TE121 is a single span, selectable T1 (24-channel), E1 (32-channel), or J1 (24-channel) card. The card utilizes Digium's VoiceBus™ technology. Improving upon the prior TE120P which does not offer expansion capabilities, the TE121 may be combined with Digium's VPMADT032 echo cancellation module to deliver 128ms of echo cancellation across 30 channels in E1 mode or 24 channels in T1 mode.

Digium TE122B

The TE122 is a single span, selectable T1 (24-channel), E1 (32-channel), or J1 (24-channel) card. The card utilizes Digium's VoiceBus™ technology. Improving upon the prior TE120P which does not offer expansion capabilities, the TE122 may be combined with Digium's VPMADT032 echo cancellation module to deliver 128ms of echo cancellation across 30 channels in E1 mode or 24 channels in T1 mode.

Digium TE210P

The TE210P is the next generation of Digium hardware that improves performance and scalability through bus mastering architecture. The TE210P supports E1, T1, and J1 environments and is selectable on a per-card or per-port basis. This feature enables signaling translation between E1, T1, J1 equipment. The product is fully compatible with existing software applications and it is fully integrated with the Asterisk Open Source PBX/IVR platform.

Digium TE212P

The TE212P offers an on-board DSP-based echo cancellation module. It supports E1, T1, and J1 environments and is selectable on a per-card or per-port basis.

Digium TE220P

Digium's TE220 PCI Express card provides termination of up to 60 channels of voice or data across two E1, T1, or J1 interfaces in a PCIe x1 form factor. Selectable on a per-port or per-card basis, the TE220 allows E1 and T1 circuits to be mixed with full channel synchronization. Supporting PCIe x1, the TE220 may be used in any available PCIe 1.0 compliant slot - 1x, x4, x8, and x16 without considerations for voltage selection or lane size. Also, the TE220 may be combined with Digium's VPMOCT064 Octasic DSP-based echo cancellation module (not shown in picture).

Digium TE410P

Quad-Span togglable E1/T1/J1 card enables per card or per port selection of either T1, E1, J1 signaling formats (3.3 volt PCI only).

Digium TE412P

The TE412P is the next generation of Digium hardware that offers an on-board echo cancellation module. Digium has designed the TE412P to be fully compatible with existing software applications and it is fully integrated with the Asterisk Open Source PBX/IVR platform. Also, the open source driver supports an API interface for custom application development. The TE412P supports industry standard telephony and data protocols, including Primary Rate ISDN (both N. American and Standard Euro) protocol families for voice, PPP, Cisco, HDLC, and Frame Relay data modes.

Digium TE420P

Digium's TE420 PCI Express card provides termination of up to 120 channels of voice or data across four E1, T1, or J1 interfaces in a PCIe x1 form factor. Selectable on a per-port or per-card basis, the TE420 allows E1 and T1 circuits to be mixed with full channel synchronization. Supporting PCIe x1, the TE420 may be used in any available PCIe 1.0 compliant slot - 1x, x4, x8, and x16 without considerations for voltage selection or lane size. The TE420 may be combined with Digium's VPMOCT128 Octasic DSP-based echo cancellation module (not shown in picture).

Sangoma A101 T1/E1 AFT card

Available as Single T1/E1 port (A101) or Dual T1/E1 port (A102) with daughter board (as shown in photograph) the A101/A102 supports Linux (all versions, releases and distributions from 1.0 up), FreeBSD, Open BSD (X.25, BSC and SS7 NOT available on BSD). With all set-up in software configuration or by machine BIOS the card use the following protocols: Frame Relay, X.25, HDLC, PPP, SS7, Transparent bit-stream, BSC.

Sangoma A101D with Hardware Echo Cancellation

A101D PCI Express Interface with Hardware Echo Canceller supporting up to 30 simultaneous calls over a single T1, E1, or J1 port and supports Linux (all versions, releases and distributions from 1.0 up), FreeBSD, Open BSD (X.25, BSC and SS7 NOT available on BSD).

Sangoma A102 T1/E1 AFT card

The A102 supports up to 60 voice calls or 4.096 Mbps of full-duplex data throughput over two T1, E1, or J1 lines. Operating systems: Linux (all versions, releases and distributions from 1.0 up), Windows NT/2000/XP, FreeBSD, Solaris. All of Sangoma’s AFT products use the same base PCI interface card. Fully compatible with all commercially available motherboards - proper PCI-standard interrupt sharing without manual tuning.

Sangoma A102D with Hardaware Echo Cancellation

The Sangoma A102 Card: two ports of optimized voice and data over T1, E1, and JI available with Telco-grade hardware echo cancellation. Mix T1 channel banks and E1 networks with full channel synchronization. TDM clocking mode lets network timing to be passed from a network-connected DS0 to any or all of the other ports, so both T1 and E1 are supported simultaneously. The A102 uses the same PCI or PCI Express interface.

Sangoma A104 QUAD T1/E1 AFT card based on AFT PCI Technology

The A104 provides full speed 132 Mbps PCI bus transfer with FPGA based processing to unload the host CPU in demanding environments such as soft PBX/IVR voice applications. Compatible with both the 3.3v and 5v PCI bus, A104 cards operate in all commercially available motherboards sharing IRQs properly with themselves and all other PCI compatible devices, so you never have to worry about hardware compatibility issues.

Sangoma A104D QUAD T1/E1 AFT card based on AFT PCI Technology with on board DSP

The DSP card on the "d" model features Octasic's certified carrier-grade algorithms providing carrier grade echo cancellation and Voice Quality Enhancement (VQE) functions. Supporting 32-672 channels G.168-2002 echo cancellation, a minimum of 1024 taps for a 128ms tail/channel on all channel densities, the system also supports Octasic music protection, acoustic echo control and adaptive noise reduction. The "d" model also features on-board DTMF decoding and tone recognition.

Sangoma A108 OCTAL (8 PORT) T1/E1/J1 AFT card

The A108 provides up to 16.4Mbps of full duplex data throughput or 240 voice calls over eight T1 and or E1 lines to support high performance PCI-based routing and telephony systems. Advanced clocking features allow E1 and T1 lines to be mixed with full synchronization.

GSM PCI BN1GSM, BN2GSM and BN3GSM cards

beroNet offers with the BNxGSM card series, a powerful and flexible GSM solution for the Open Source PBX Asterisk. Together with our channel driver "chan_gsm", wich is covered by the GPL, you can easily add GSM ports to your Asterisk system. Digital audio quality with noise suppression and echo cancelling is granted by the use of Siemens GSM Modules (Tri-Band 900/1800/1900 Mhz). Optional available are Siemens Modules with Tri-Band 850/1800/1900. Sending and receiving SMS is also fully supported either by the Asterisk Manger interface or the Asterisk CLI. The BNxGSM card series is available with 1, 2 or 3 GSM ports. Each GSM port has 2 SIM card holder, one reachable from outside and one on the rear side of the board. You can hot swap in software between the card holders during operation mode.

Cisco - Linksys PAP-2T - Phone Adapter with 2 Ports

The Cisco - Linksys VoIP Phone Adapter enables high-quality feature-rich telephone service. PAP-2T has two standard telephone jacks for your phones or fax machines, with independent phone numbers. The product provides high quality, clear sounding voice service simultaneous with Internet use and it is compatible with all common telephone features: Caller ID, Call Waiting, Voicemail, etc.

Cisco - Linksys SPA2102 - Phone Adapter with 2 FXS ports + router

The Cisco - Linksys SPA2102 ATA features offer two POTS (Plain Old Telephone Service) ports to connect existing analog phones, fax machines, or to a PBX system. The SPA2102 VoIP phone adapter includes 2 100BaseT RJ45 Ethernet interfaces (LAN-WAN) to connect to a home or office LAN, as well as an Ethernet connection to a broadband modem or router (WAN). Each SPA2102 service line can be independently configured via software controlled by the service provider or the end user.

Cisco - Linksys SPA3102 - Voice Gateway with Router

The Cisco - Linksys SPA3102 VoIP adapter offers the additional benefit of an integrated connection for legacy telephone network "hop-on, hop-off" applications. With SPA3102 ATA users will be able to leverage their broadband phone service connections more than ever by automatically routing local calls from cell phones and land lines to VoIP service providers and back. If power is lost to the unit or Internet service is down, calls can be redirected to a traditional carrier via the FXO interface.

MobiLink IP - VoIP GSM Gateway

Topex MobiLink IP is a GSM/UMTS small capacity gateway with VoIP interfaces. Its main functionality is to interconnect IP PBX or hibrid PBX with mobile networks. With TOPEX MobiLink IP you make significant savings on calls from IP to cellular networks and backwards. The equipment is available with 1 and 2 SIM cards.

Technical Specifications

• Works with any IP-PBX or Softswitch based on SIP or H323 protocols;
• Advanced security with integrated firewall;
• Easy to use web based interface;
• Live traffic monitoring, Statistics: ASR, ACD;
• Can be configured via SSH.

Cisco - Linksys SPA400 - Internet Telephony Gateway with 4 FXO Ports

The Cisco-Linksys SPA400 Voicemail System with 4-Port FXO Gateway has the ability to connect up to four (4) standard analog telephones lines to VoIP network and includes the additional benefit of an integrated voicemail application. The SPA400 utilizes multiple analog phone lines and automatically routes calls to and from your existing PSTN telephone service. Designed to be implemented with the former LVS IP Telephony System, actualy Cisco SMB line, the SPA400 enables cost-conscience business users to leverage the high value features generally found only on more expensive PBX equipment.

Cisco - Linksys SPA8000 - 8 - Port Telephony Gateway

The Cisco - Linksys SPA8000 8-Port IP Telephony Gateway is a full featured Analog Terminal Adapter (ATA). The SPA8000 features eight RJ-11 FXS ports to connect analog telephones to IP-based data networks and includes a single multi-port RJ-21 50-pin connector offering an alternative connection choice when deploying the telephony IP gateways in varied environments. The device also has one 10/100Base-T RJ-45 Ethernet interface to connect to either a router or multi-layer switch. The SPA8000 offers all the key features and capabilities with which service providers can provide customized services to their subscribers.

Cisco - Linksys SPA9000 - Full Featured IP PBX System

The Cisco-Linksys SPA9000 marries the rich feature set of high-end PBX telephone systems with the convenience and cost advantages of VoIP. It has common voice system features such as an auto-attendant, shared line appearances, three way call conferencing, intercom, music on hold, call-forwarding and much more. The SPA9000 opens up access to the benefits of VoIP telephony, IP based communications including low cost long distance service, telephone number portability, and one network for both voice and data.